Transition Coupler

The Transition range is used to join rebars of different diameters when it is possible to rotate one bar, and is designed to achieve failure loads greater than 115% of the characteristic strength of the smaller diameter grade 500 bar. The couplers are designed to suit bar sizes 12mm to 50mm

Add to Quote


The Tapered Thread Transition Coupler is used to join reinforcing bars of different diameters where one coupler can be rotated.
With all the benefits of the Standard range, Transition couplers are designed to achieve failure loads greater than the national code requirement of the smaller diameter grade 500 reinforcing bar. The Transition coupler comprises an internally threaded sleeve with two right hand threads both of which are tapered towards the middle of the coupler. The diameter of each thread corresponds to the appropriate bar size. A nominal +25mm should be allowed per threaded bar end for square cutting the bar end.

Additional information

Weight 2.5 kg
Dimensions 15 × 5 × 5 cm

12/14, 12/16, 14/16, 16/18, 16/20, 18/20, 20/22, 20/25, 20/28, 22/26, 25/28, 25/32, 26/30, 28/32, 30/34, 32/40, 34/40, 40/50


There are no reviews yet

Be the first to review “Transition Coupler”
Open chat
Thanks for contacting us. This Whatsapp Chatline is attended to during Office Hours. Start chatting to a Joluka representative by opening the chat below.